Calls

1. Use the keypad to enter the desired number.
2. Press the Call button or OK.

1. Press Line to select the desired line. (If you don’t select a line, the handset will use the default outgoing line.)
2. Select OK or Dial.
3. Use the keypad to enter the desired phone number.
4. Press the Call button or OK.

1. Press OK to enter the main menu.
2. Select Directory.
3. Use the up or down navigation buttons to highlight the contact you want to call.
4. Press the Call button to place the call.
   
   • If the contact has one number in your directory, the device will dial the number.
   • If the contact has multiple numbers stored in your directory, the screen will display each number. Press the up or down navigation buttons to locate the desired number and highlight it. Press the Call button.

OR

1. When the handset is idle, press the down navigation button.
2. Use the up or down navigation buttons, and highlight the desired number.
3. Press the Call button to place the call.
   
   • If the contact has one number in your directory, the phone will dial the number.
   • If the contact has multiple numbers stored in your directory, the screen will display each number. Press the up or down navigation buttons to locate the desired number and highlight it. Press the Call button to place the call.

1. When the handset is idle, press History.
2. Use the up or down navigation buttons to highlight the desired list, and then press OK.
3. Use the up or down navigation buttons to select a previously dialed number.
4. Press the Call button to place the call.

This feature applies when calls are made to another Yaelink cordless handset registered to the same base station.

• Press OK to enter the main menu, and select the Intercom button. Or, press the up navigation button.
• The screen will display other registered handset names. Press the up or down navigation buttons to highlight the handset you want to call. Or, select All HS to dial all handsets.
• Press the Call button, the speaker button or OK to place the call.

Press the Call button twice when the handset is idle. It will dial the last dialed number.

1. When the handset is idle, press the Call button.
2. Use the up or down navigation buttons to select a previously dialed number.
   If the number needs to be edited, select Options and then Edit Before Call to edit the number.
3. Press the Call button again.

You can answer a call in three ways:

• Using the handset: Press the Call button or Accept.
• Using the speaker: Press the speaker button.
• Using the headset: With a headset connected, press Accept.

Press Silence or the End Call (red phone) button.

Press the Call button, the speaker button, OK or Accept. This places the original call on hold and answers the incoming call.

Either press the End Call (red phone) button, or place the handset in the charger cradle.

1. When the handset is idle, press History.
2. Use the up or down navigation buttons to highlight the desired call history list, and then press OK.
3. Use the up or down navigation buttons to highlight a previous local call, and then select OK.

The screen will display the detailed information about the caller.

During an active call, press the Mute button to mute your voice. Press the Mute button again to unmute the call.

During a call, press Options and then Hold.

• If you have a call on hold and then place the handset on the charger cradle, the call will continue to hold and will not disconnect.

When one call is on hold:

1. Press Resume, the speaker button or the Call button.

When two calls are on hold:

1. Use the up or down navigation buttons to select the appropriate call, and press Resume.
2. Select Swap to switch between the two calls.